![background image](http://html2.mh-extra.com/html/xerox/workcentre-pe120i/workcentre-pe120i_system-administration-manual_4287457090.webp)
Page 6-24
Xerox WorkCentre PE120i System Administration Guide
Ne
twor
k
Ins
ta
lla
tio
n
Us
in
g In
ter
n
e
t Se
rv
ic
e
s
IPP
Use these instructions to setup IPP using CentreWare Internet Services.
NOTE:
The HTTP settings for the device will have been setup when completing the
Enabling CentreWare Internet
Services section.
To complete the installation of the device, perform these steps:
¾
Enable CentreWare Internet Services (see
“Enabling Internet Services” on page 6-5
).
¾
At the CentreWare Internet Services Home Page for the
WorkCentre PE120i
, select the
[Properties]
tab.
¾
Select the plus symbol
[+]
to the left of the
Connectivity
folder in the
Properties
frame,
and then select the
[+]
symbol to the left of the
Protocols
folder.
¾
Select
[IPP]
.
Select the checkbox to enable IPP.
Check the
IPP Configuration
details are correct. If any of the details are incorrect then
enter
the required configuration details in the appropriate boxes.
¾
Click the
[Apply]
button to implement any changes.
NOTE:
Click the
[Undo]
button to cancel any changes made and return to the
previous values.
¾
Select the
[Status]
tab and then select
[Reset Network Controller]
to enable the
selections to take effect.
¾
Continue with
Test Print
.
1
2
3
4
5
6
7