Xerox WorkCentre PE120i System Administration Guide
Page 6-21
Ne
twor
k
Ins
tal
la
tio
n
Us
in
g In
ter
net
Se
rv
ic
es
NOTE:
Click the
[Undo]
button to cancel any changes made and return to the
previous values.
¾
Select the
[Status]
tab and then select
[Reset Network Controller]
to enable the
selections to take effect.
¾
Using the procedure located in the
Xerox CentreWare documentation
, install the driver for
the workstation.
¾
Continue with
Test Print
.
Test Print
To ensure the device has been installed on the network correctly a test print should be
submitted from a client workstation. Perform the following steps:
¾
Open a document on a client workstation.
¾
Select the device as the printer to which the selected document will be sent.
¾
Print the document on the device and verify that it prints correctly.
¾
Ensure that the driver is installed on every workstation that will be sending jobs to the
device.
¾
Repeat the test for all workstations that will be sending jobs to the device.
¾
The installation process is now complete.
7
8
9
1
2
3
4
5
6