![background image](http://html2.mh-extra.com/html/xerox/workcentre-pe120i/workcentre-pe120i_system-administration-manual_4287457026.webp)
Page 2-2
Xerox WorkCentre PE120i System Administration Guide
Ba
si
c N
e
tw
o
rk
I
n
st
a
lla
ti
on
Information Checklist
Before starting the basic network installation procedures, please ensure the following items
are available or have been performed:
CAUTION: Do not connect the network cable to the
WorkCentre PE120i
until
instructed to do so.
Item
By
An existing operational network utilizing TCP/IP is required, these
procedures are not designed to install a network.
Customer
A suitable network cable.
Customer
If you are going to configure TCP/IP manually, you need to obtain and
record the following information:
• TCP/IP Address:
• Gateway Address:
• Subnet Mask Address:
• Primary DNS Server Address:
Refer to the Glossary for additional information on the Gateway
Address, Subnet Mask Address and Primary DNS, if needed.
Customer
Test the
WorkCentre PE120i
to ensure it is installed fully and
functioning correctly.
Customer
WorkCentre PE120i
print and fax drivers.
Xerox