![background image](http://html2.mh-extra.com/html/xerox/workcentre-pe120i/workcentre-pe120i_system-administration-manual_4287457084.webp)
Page 6-18
Xerox WorkCentre PE120i System Administration Guide
Ne
twor
k
Ins
ta
lla
tio
n
Us
in
g In
ter
n
e
t Se
rv
ic
e
s
NOTE:
Click the
[Undo]
button to cancel any changes made and return to the
previous values.
¾
You can Add or Edit a Trap Destination Address by making the following selections and
settings in the Trap Destination Addresses section of the frame:
Click the
[Add]
button or the
[Edit]
button to add a new address or amend an existing
address.
In the
IP Address Destination section
, enter or amend the
IP
Address
and
UDP Port
Number
.
In the
Traps
section, enter the
Trap Community Name
and check the boxes
corresponding to the required
Traps to be Received
.
¾
Click the
[Apply]
button to implement any changes and return to the first screen.
NOTE:
Click the
[Undo]
button to cancel any changes made and return to the
previous values.
¾
You can Delete a Trap Destination Address from the Trap Destination Addresses section
of the frame:
Highlight the required
Address/Socket or Port
and click the
[Delete]
button.
¾
Click the
[Apply]
button to implement any changes.
NOTE:
Click the
[Undo]
button to cancel any changes made and return to the
previous values.
¾
Select the
[Status]
tab and then select
[Reset Network Controller]
to enable the
selections to take effect.
6
7
8
9