Page 4-12
Xerox WorkCentre PE120i System Administration Guide
Pr
in
t Dr
iv
e
r I
n
s
tall
a
ti
on
for
Ne
twor
k
e
d P
rint
e
rs
Windows 2000 (Internet Printing Protocol)
NOTE:
Windows 2000 supports printing via IPP as standard when TCP/IP is
installed on a Windows 2000 Workstation.
Use the
Add Printer Wizard
to add the
WorkCentre PE120i
to the network.
¾
Select
[Start
], select
[Settings
], and then select
[Printers
].
Double-click on the
[Add Printer]
icon to display the Add Printer Wizard.
¾
Verify that the
[Network Printer]
is selected and click
[Next]
.
The
[Locate Your Printer]
screen will be displayed.
¾
Select
[Connect to a printer on the Internet or on your intranet].
In the
[URL]
field enter the IP address or hostname of the printer in the following format:
“
http://aaa.bbb.ccc.ddd
” or “
http://printer-host-name
”, where “aaa.bbb.ccc.ddd” is the IP
address of the
WorkCentre PE120i
and “printer-host-name” is the host name of the
WorkCentre PE120i
registered with a DNS server.
The Add Printer Wizard will then ask if you wish to install a local driver for this printer. You
should click [OK] to install the driver.
¾
Insert the CD ROM with the
WorkCentre PE120i
drivers into the workstation and select
[Have Disk
].
Browse to the required Windows 2000 driver on the CDROM and select
[OK
].
NOTE:
The driver will be found in the
Drivers>Print
folder on the CD in the
appropriate PCL or PostScript (PS) folder. For PostScript, you will need to choose
the required language. The driver is identified by the file extension
.inf
.
Select
[Next
], and select
[Next]
again and the
WorkCentre PE120i
driver will be loaded
onto the workstation.
A
dialog
box will be displayed with a message regarding the printing of a test page.
Select
[Finish]
to accept the
Yes
choice.
¾
Continue with
Test Print
on page
4-14
.
1
2
3
4
5
