Xerox WorkCentre PE120i System Administration Guide
Page 6-11
Ne
twor
k
Ins
tal
la
tio
n
Us
in
g In
ter
net
Se
rv
ic
es
NetWare
Use these instructions to install
WorkCentre PE120i
on a NetWare network using CentreWare
Internet Services.
Installation Procedure
There are three stages required to install the
WorkCentre PE120i
on a NetWare network using
CentreWare Internet Services:
¾
PCONSOLE or NWADMIN Setup
This procedure is used to setup the network using NetWare’s PCONSOLE or
NWADMIN utility.
¾
Configure the
WorkCentre PE120i
This procedure explains how to use CentreWare Internet Services to
configure the
WorkCentre PE120i
.
¾
Test Print
A print job should be submitted to ensure the device has been installed and
configured correctly.
PCONSOLE or NWADMIN Setup
If running NLSP, be sure that RIP/SAP compatibility is configured on the same segment as the
WorkCentre PE120i
.
Using the PCONSOLE or NWADMIN utility, perform the following steps:
¾
Login to File Server as Supervisor or equivalent.
¾
Create the Print Queue.
¾
Create Print Server Name and Password.
¾
Define the printer as
Defined Elsewhere
or
Remote/Other Unknown
.
¾
Verify the Frame Type.
1
2
3
4
5
