Page 6-22
Xerox WorkCentre PE120i System Administration Guide
Ne
twor
k
Ins
ta
lla
tio
n
Us
in
g In
ter
n
e
t Se
rv
ic
e
s
Raw TCP/IP Printing
Use these instructions to enable or disable Raw Printing using CentreWare Internet Services.
Installation Procedure
There are two stages required to install the device on an Raw TCP/IP printing network using
CentreWare Internet Services:
¾
Configure the
WorkCentre PE120i
This procedure explains how to use CentreWare Internet Services to
configure the device.
¾
Test Print
A print job should be submitted to ensure the device has been installed and
configured correctly.
Configure the WorkCentre PE120i
To complete the installation of the
WorkCentre PE120i
, perform these steps:
¾
Enable CentreWare Internet Services (see
“Enabling Internet Services” on page 6-5
).
¾
At the CentreWare Internet Services Home Page for the
WorkCentre PE120i
, select the
[Properties]
tab.
¾
Select the plus symbol
[+]
to the left of the
Connectivity
folder in the
Properties
frame,
and then select the
[+]
symbol to the left of the
Protocols
folder.
¾
Select
[Raw TCP/IP Printing]
.
Select the checkbox to enable Raw TCP/IP Printing.
Enter the
[Port Number]
and then enter the required port number.
NOTE:
While you can change the port number at which the
WorkCentre PE120i
will
accept RAW print jobs, it is recommended that you use the default port, 9100. this is
the industry standard
¾
Click the
[Apply]
button to implement any changes.
NOTE:
Click the
[Undo]
button to cancel any changes made and return to the
previous values.
1
2
3
4
5
