Copying
WorkCentre 7755/7765/7775 Multifunction Printer
User Guide
108
To build a copy job:
1. Touch
Copy
on the touch screen.
2. Program and scan the first segment:
a. Load the originals for the first segment.
b. Touch the desired copy settings (layout adjustments, image adjustments, etc.), for the
first segment.
c. Touch the
Job Assembly
tab.
d. Touch
Build Job
, then touch
On
.
e. Press the green
Start
button on the control panel to scan the first set of originals.
3. Program and scan additional segments:
a. Load the originals for the next segment.
b. When the
Build Job
window appears, touch
Program Next Segment
in the upper-right corner
of the window.
c. Using the appropriate tabs, touch the required settings for that segment.
d. Press the green
Start
button to scan the originals for that segment.
4. Repeat step 3 for each remaining segment.
5. When all of the segments have been programmed and scanned:
a. If the
Build Job
window is not visible on the display screen, touch the
Job Assembly
tab, then
touch
Build Job
.
b. Using the alphanumeric keypad, enter the number of copies in the
Quantity for Final Job
box.
c. Touch the
Print the Job
button in the upper-right corner of the
Build Job
window.
The Job Progress window displays. If necessary, the job can be cancelled by touching
Delete
.
Printing a Sample Copy
With a complicated copy job, it can be helpful to print a test copy before printing multiple copies. This
feature prints a single copy and holds the remaining copies. After inspection of the sample, the
remaining copies can be printed (using the same settings), or cancelled.
Note:
The sample copy is not counted as part of the total quantity selected. For example, when
copying a book, if three is entered as the number of desired copies; one copy of the book will be
printed, and three other copies will be held until they are released for printing (four copies total).
To print the sample copy:
1. Touch
Copy
on the touch screen, then touch the desired copy settings.
2. Touch the
Job Assembly
tab.
3. Touch
Sample Job
, then touch
On
.
4. Touch
Save
.
5. Press the green
Start
button on the control panel. The sample set is printed.
To print the remaining copies or delete the job:
1. To release and print the remaining copies of the job, touch
Release
.
2. If the sample copy is unsatisfactory, touch
Delete
.
Summary of Contents for WORKCENTRE 7775
Page 10: ...Contents WorkCentre 7755 7765 7775 Multifunction Printer User Guide 10...
Page 30: ...Features WorkCentre 7755 7765 7775 Multifunction Printer User Guide 30...
Page 110: ...Copying WorkCentre 7755 7765 7775 Multifunction Printer User Guide 110...
Page 257: ...Index WorkCentre 7755 7765 7775 Multifunction Printer User Guide 257...
