Xerox Versant 2100, User Manual, Page: 41 / 296

8. From the Tray Properties window, enter the correct paper information, including size,
type, weight and, if necessary, paper curl and / or alignment option.
9. Select OK to save the information and close the Tray Properties window.
Loading Pre-drilled Stock in Trays 1, 2, and 3
Pre-drilled paper is defined as having two or more holes along one edge for use in ring
binders and notebooks. To prevent jams or damage, make sure that any plugs (pieces
cut out of the paper to create the holes) do not remain in the stack.
1. Select the appropriate paper stock for your print job.
2. Pull out the tray slowly until it stops.
3. Open the ream of paper with the seam side facing up.
4. Fan the sheets before loading them into the tray.
5. Load and align the edge of the pre-drilled paper with the holes against the left edge
of the tray.
Paper can be loaded either in the LEF / portrait or SEF / landscape direction.
6. Adjust the paper guides by pressing in the guide release and carefully moving the
Edge Guide until it lightly touches the edge of the material in the tray.
Do not load materials above the MAX line located on the rear Edge Guide.
7. Gently push in the tray until it comes to a stop.
If enabled by your System Administrator, the Paper Tray Properties window displays
from the Stock Library Manager on the print server. The Stock Library Manager is not
available at the press.
8. From the Tray Properties window, enter the correct paper information, including size,
type, weight and, if necessary, paper curl and / or alignment option.
9. Select OK to save the information and close the Tray Properties window.
Loading Media in the Bypass (Tray 5)
Note
The Bypass Tray is located on the top of the OHCF (either Trays 6 / 7 or optional Trays
8 / 9).
4-5 Xerox ® Versant ® 2100 Press
User Guide
Paper and Other Media