Xerox Versant 2100, User Manual, Page: 39 / 296

8. From the Tray Properties window, enter or verify the correct paper information,
including size, type, weight and, if necessary, paper curl and / or alignment option.
Select the stock and assign the stock to the tray to be used.
9. Select OK to save the information and close the Tray Properties window.
Loading Tab Stock in Trays 1, 2, and 3
You can load either single straight collated or single reverse collated tab stock.
Before loading tab stock in paper trays 1, 2 or 3, you need to program your tab job at
the Stock Library Manager application on the print server. Create a new tab stock name
and select these tab-specific property settings for the tab print job:
• Type - Precut Tabs or Tab Stock
• Modules - the number of tabs in the set
• Paper Size - Auto Select or custom size of 9 x 11 inches
• Weight - select the correct tab stock weight in the range 106 to 176 gsm
• Tray / Source - Tray 1, 2 or 3
• Print Output Order / Tab Sequence - N to 1
• Output Delivery - Face Up
Note
Refer to the print server documentation for more detailed information on how to set up
a tab job at your print server.
Note
If a jam occurs while running tabbed sets, cancel the job and start again.
1. After programming your tab job at the print server, select the appropriate and
matching tab stock for your print job.
2. Pull out the tray slowly until it stops.
3. Fan the tab stock before loading into the tray.
4. Load the tab stock LEF (portrait) and align the straight edge of the tab stock against
the left edge of the tray (tabs to the right or trailing edge). For single straight collated
tabs, the first blank tab cutout in the stack will be toward the rear of the tray. For
single reverse collated tabs, the first blank tab cutout in the stack will be toward the
front of the tray.
Note
Tab stock is loaded so the straight edge of the stock is in the feed direction. Also, you
can only load the tab stock LEF.
4-3 Xerox ® Versant ® 2100 Press
User Guide
Paper and Other Media