Xerox Versant 2100, User Manual, Page: 215 / 296

10 C / Z Fold Output Tray (Optional)
The optional Folder tray receives sheets when you select C-folding or Z-folding of 8.5
x 11 in./A4 output and 11 x 17 in. / A3 media.
11 Left Cover
Open this cover to access the press and to clear paper jams.
12 Post-Process Inserter (Interposer) / Tray T1
Use this tray to load preprinted stock that serves as separators and covers inserted into
the printed output. Paper loaded in this tray is not printed on. The tray holds up to 200
sheets of 20 lb. / 75 gsm paper and can be loaded either LEF or SEF direction.
13 C / Z Fold Output Tray Button
Press this button to open the C / Z Folder Output Tray.
14 Manual Decurl Button
When pressed, this button activates a decurling feature for the output. This applies
especially to lighter weight paper.
Manual Decurling Feature on the Finisher
The Finisher has a manual decurling feature, which allows you to adjust the curl of the
print output at point of need.
Pressing the Decurler button on the finisher switches the decurl feature between the
Auto, On, and Off modes.
1. Auto button: When this indicator is lit, the appropriate curl correction is automatically
performed depending on the sizes and orientation of the printed output. The button
should be set to Auto for most situations. The button automatically switches to the
Auto mode when:
• The press is switched on
• The press exits the Power Saver mode
16-3 Xerox ® Versant ® 2100 Press
User Guide
Standard Finisher / Booklet Maker Finisher