Xerox Versant 2100, User Manual, Page: 119 / 296

Recommended Solution Possible Cause Fault Code Fault Area
Perform the following in this order:
1. Remove or clear any jammed
paper.
2. Replace and fan the paper in
tray.
3. Power Off / On the press.
4. If problem still persists, contact
the Customer Support Center
Gate sensor not turned
on fault during paper
transportation from
Tray 6 078-112 Tray 6
Gate sensor not turned
on fault during paper
transportation from
Tray 7 078-113 Tray 7
General tray malfunc-
tion 078-2[00-
99], 078-
3[00-99],
078-4[00-
99], 078-
6[00-99],
078-9[00-
99] Trays 6 and 7
1. Fan the paper to eliminate pa-
per adhesion (especially in high
humidity or high temperature
environments).
2. Check the position of Skew Ad-
justment Levers. The levers
should be retracted.; refer to
Skew Adjustment Levers (Trays
6 and 7)
.
3. Replace the tray feed rolls
(feed, retard, nudger); refer to
Replacing the Feed Rolls for the
OHCF (Trays 6 and 7)
.
4. If problem still persists, contact
the Customer Support Center
Repetitive misfeeds or
multifeeds 078-106,
078-125,
078-126,
078-127,
078-156 Trays 6 and 7
Related Topics:
Replacing the Bypass Tray Feed Rolls for the OHCF (Trays 6 and 7)
Replacing the Feed Rolls for the OHCF (Trays 6 and 7)
Skew Adjustment Levers (Trays 6 and 7)
10-17 Xerox ® Versant ® 2100 Press
User Guide
Problem Solving