Xerox Versant 2100, User Manual, Page: 17 / 296

5 Touch Screen
Directly touch the screen to select and set features. Displays instructional and
informational messages, fault clearance procedures and general press information.
6 Log In / Out button
Use to log in and out of Administrator mode or Authentication mode with user ID and
password.
7 Language button
Use to select a different language for the touch screen options.
8 Power Saver button
Use this button if the press has been inactive and the touch screen is dark (system is
in Energy Saver mode). This button manually exits the system from Energy Saver mode;
it does not place the press in Energy Save mode.
9 Numeric Keypad
Use to enter alphanumeric characters. The ‘C’ Cancel Entry cancels the previous entry
made on the numeric keypad.
10 Clear All button
Use this button to return all selections to the same state as when the press was powered
on. Press once to clear a current entry. Press twice to return to default settings.
11 Stop button
Press to stop and pause the print job in progress.
12 Cancel Entry button
Use this button to cancel the previous entry made on the numeric keypad.
13 Start button
Press to start and print a selected report from the print engine. Also used by the
Customer Service Engineer during diagnostic routine procedures.
14 Press Status Lights
The three indicator lights that identify: data transmission in progress, the press is
experiencing an error, and main power is on.
Logon
There are two logon levels:
• Guest / Operator: This is the default logon user. You are automatically logged on as
Guest.
1-5 Xerox ® Versant ® 2100 Press
User Guide
Product Overview