Xerox Versant 2100, User Manual, Page: 155 / 296

Recommended Solution Possible Cause Fault Code Fault Area
1. Remove or clear any jammed
paper.
2. Replace and fan the paper in
tray.
3. Power Off / On the press.
4. If problem still persists, contact
the Customer Support Center.
Multiple feed of
sheets / paper jam 178-900 - 178-
904 Trays 8 and 9
Related Topics:
Replacing the Bypass Tray Feed Rolls for the OHCF (Trays 8 and 9)
Replacing the OHCF Feed Rolls for the OHCF (Trays 8 and 9)
Skew Adjustment Levers (Trays 8 and 9)
OHCF (Trays 8 and 9) Jam Clearance
Clearing OHCF (Trays 8 / 9) Jams
Nip Release levers inside of the Transport area of the Feeder hold back large size sheets
(such as A3, 11 x 17 inches, 12 x 18 inches) to reduce the chance of jamming as paper
enters the print engine.
Note
Follow the jam clearance instructions displayed on the touch screen. Always ensure that
all paper jams, including any small ripped pieces of paper, are cleared before proceeding
with your print jobs.
Paper Jams When the Bypass is Installed on Trays 8 and 9
Tip
Always ensure that all paper jams, including any small, ripped pieces of paper, are cleared
before proceeding with any print jobs.
1. Remove the paper currently loaded in the Bypass (Tray 5).
2. Lift and open the Top Cover of the Bypass (Tray 5).
11-11 Xerox ® Versant ® 2100 Press
User Guide
Chained (Second) Oversized High Capacity Feeder (OHCF / Trays 8 and 9)