Xerox Versant 2100, User Manual, Page: 117 / 296

Recommended solution Possible cause Fault code Fault Area
Reseat the Drum Cartridge; For
091-324 to 091-327, replace the
Drum Cartridge. Erase Lamp faults; Drum
Cartridge not set correctly 091-323 to
091-327, 091-
4[00-99] to
091-9[00-99] Xerographic
Cleaning
Reposition the waste bottle, or-
der a new waste bottle, and re-
place when full. Waste Toner Bottle Near
Full 091-400
Reseat the Drum Unit (Y);
Switch Drum Units; If problem
persists, replace Drum Unit (Y). CRUM data is damaged 091-920, 091-
924
Reseat the Drum Unit (M);
Switch Drum Units; If problem
persists, replace Drum Unit (M). CRUM data is damaged 091-922, 091-
925
Reseat the Drum Unit (C);
Switch Drum Units; If problem
persists, replace Drum Unit (C). CRUM data is damaged 091-923, 091-
926
Reseat the Drum Unit (K);
Switch Drum Units; If problem
persists, replace Drum Unit (K). CRUM data is damaged 091-915, 091-
916
Power Off / On the press.
If error persists, contact the
Customer Support Center. Software error 092-333 Process Control
Power Off / On the press.
If error persists, contact the
Customer Support Center. Transfer Belt or Roll fault 094-312, 094-
318 Transfer
Fault Codes - Oversized High Capacity Feeder (Trays 6 and 7)
The OHCF fault codes below may pertain to a specific tray of the feeder. If you experience
these fault codes frequently, you should follow the procedure on how to replace the
feed rolls (
Replacing the Bypass Tray Feed Rolls for the OHCF (Trays 6 and 7) and
Replacing the Feed Rolls for the OHCF (Trays 6 and 7) ).
10-15 Xerox ® Versant ® 2100 Press
User Guide
Problem Solving