Xerox Phaser 7100 User Manual Download Page 90

Page: 90 / 140

Maintenance

Phaser 7100 Color Printer

User Guide

Moving the Printer

•

Always turn off the printer and wait for the printer to shut down.

•

Disconnect the power cord from the back of the printer.

•

When lifting the printer, grasp the areas as shown.

•

Keep the printer level to avoid toner spillage.

•

Always use at least three people to lift the printer.

CAUTION:

Failure to repackage the printer properly for shipment can result in damage not covered

by the Xerox

Warranty, Service Agreement, or Total Satisfaction Guarantee. The Xerox

Warranty,

Service Agreement, or Total Satisfaction Guarantee do not cover damage to the printer caused by

improper moving.

CAUTION:

The Xerox

Total Satisfaction Guarantee is available in the United States and Canada.

Coverage could vary outside these areas. Please contact your Xerox representative for details.

Summary of Contents for Phaser 7100













































































































































Search results

Summary of Contents for Phaser 7100

Reviews:

Related manuals for Phaser 7100

Brands by name

Popular brands

Xerox Phaser 7100, User Manual

Search results

Summary of Contents for Phaser 7100

Reviews:

Related manuals for Phaser 7100

Brands by name

Popular brands