Features
Phaser 7100 Color Printer
23
User Guide
Energy Saver Mode
Use Energy Saver options to conserve power, and set how long the printer remains idle before changing
modes. Ready mode is where the printer is at full power. Low Power mode is where power to the fuser
and other areas are turned off. Sleep mode is the lowest power state the printer can obtain without
shutting off.
Setting Up Energy Saver Modes
1.
At the control panel, press
Menu
.
2.
Navigate to
Admin Menu
, then press
OK
.
3.
Navigate to
System Settings
, then press
OK
.
4.
Navigate to
Low Power Mode
, then press
OK
.
5.
To turn on or off Low Power mode, use the arrow buttons to select
Enabled
or
Disabled
, press
OK
,
then press
Back
.
6.
Navigate to
Low Power Timer
, then press
OK
.
7.
To set the delay before the printer enters Low Power mode, use the arrow buttons to set the time,
press
OK
, then press
Back
. The range is 1–240 minutes.
8.
Navigate to
Sleep Mode Timer
, then press
OK
.
9.
To set the delay before the printer enters Sleep mode, use the arrow buttons to set the time, then
press
OK
. The range is 1–240 minutes.
Note:
The Low Power Timer and Sleep Mode Timer are independent, in that both start at the same
time.
10.
To return the printer to Ready, press
Menu
.
