Installation and Setup
Phaser 7100 Color Printer
31
User Guide
Connecting to a Computer Using USB
To use USB, you must have Windows XP SP1 and later, Windows Server 2003 and later, or Macintosh OS
X version 10.5 and later.
To connect the printer to the computer using a USB cable:
1.
Ensure that the printer is turned off.
2.
Connect the B end of a standard A/B USB 2.0 cable to the USB Port on the back of the printer.
3.
Attach the power cord and then plug in the printer and turn it on.
4.
Connect the A end of the USB cable to the USB Port on the computer.
5.
When the Windows Found New Hardware Wizard appears, cancel it.
6.
You are ready to install the print drivers. For details, see
Installing the Software
on page 33.
Initial Printer Setup
Make sure that the printer is set up before installing the printer software. Setup includes enabling the
optional features and assigning an IP address for the Ethernet network connection. If the printer has not
been previously turned on and configured, see the
System Administrator Guide
at
www.xerox.com/office/7100docs
.
