Installation and Setup
Phaser 7100 Color Printer
29
User Guide
Note:
Hardware and cabling requirements vary for the different connection methods. Routers,
network hubs, network switches, modems, Ethernet cables, and USB cables are not included with
your printer and must be purchased separately.
•
Network
: If your computer is connected to an office network or home network, use an Ethernet
cable to connect the printer to the network. You cannot connect the printer directly to the computer.
It must be connected through a router or hub. An Ethernet network can be used for one or more
computers and supports many printers and systems simultaneously. Ethernet connection is typically
faster than USB and allows you direct access to the settings of the printer using CentreWare
Internet Services.
•
Wireless Network
: For printers with the optional wireless network, you can connect the printer to
the network through a wireless router or wireless access point. A wireless network connection
provides the same access and services as a wired connection provides. A wireless network
connection is typically faster than USB and allows direct access to printer settings using CentreWare
Internet Services.
Note:
For details on configuring wireless network settings, see the
System Administrator Guide
at
www.xerox.com/office/7100docs
.
•
USB
: If you connect the printer to one computer and do not have a network, use a USB connection.
A USB connection offers fast data speeds, but typically not as fast as an Ethernet connection. In
addition, a USB connection does not provide access to CentreWare Internet Services.
Physically Connecting the Printer to the Network
Use a Category 5 or better Ethernet cable to connect the printer to the network. An Ethernet network is
used for one or more computers and supports many printers and systems simultaneously. An Ethernet
connection provides direct access to printer settings using CentreWare Internet Services.
To connect the printer:
1.
Connect the power cord to the printer, and plug the cord into an electrical outlet.
2.
Connect one end of a Category 5 or better Ethernet cable to the Ethernet port on the printer.
Connect the other end of the Ethernet cable to a correctly configured network port on a hub or
router.
3.
Turn on the printer.
Note:
For details on configuring wireless network settings, see the
System Administrator Guide
at
www.xerox.com/office/7100docs
.
