Xerox Phaser 6180MFP, Service Manual

Page: 448 / 884

4-36 Phaser 6180MFP Multifunction Printer Service Manual
General Troubleshooting
Hook Toggle
Test Hook Toggle Test
■
Time [10ms]:0000
■
Now Switching
<Press the Up or Down
button to change the
value at the cursor>
<Press the Left or Right
button to move the
cursor>
This test switches the telephone line
between the on-hook and off-hook
states at a predetermined cycle.
The toggle test value can be set in the
range of 50 to 9999, and the toggle
interval is 10ms.
Data 1: Default is 2 seconds.
Hook Set Test Hook Set Test
■
Set ON
■
Set OFF
■
Complete
<Press the Up or Down
button to change the
value at the cursor>
This test switches the telephone line
selectively to the on-hook or off-hook
state.
■
Set ON (on-hook): Connected
selectively to the on-hook circuit.
■
Set OFF (off-hook): Connected
selectively to the off-hook circuit.
Single Tone
Send Single Tone Send
■
0Hz, 400Hz, 462Hz,
1100Hz, 1300Hz,
1500Hz, 1650Hz,
1850Hz, 2100Hz, 500Hz,
600Hz, 900Hz, 1000Hz
■
Now Sending Signal
■
Complete
Checks the tone output for each single
tone for tone dialing.
DTMF Send DTMF Send Note: Unplug phone line before
performing this test to prevent a call
connection.
DTMF
Continuous DTMF Continuous
■
DTMF: 0, 1, 2, 3, 4, 5,
6, 7, 8, 9, A, B, C, D, *, #
■
Now Sending Signal
■
Complete
This test checks the tone output for all
touch tones for tone dialing.
DTMF
Individually DTMF Individually
■
0000000000000000
■
Now Sending Signal
■
Complete
<Press the Up or Down
button to change the
value at the cursor>
<Press the Left or Right
button to move the
cursor>
This test checks the tone output for
one of the 16 key numbers set on the
LCD.
Use to transmit the specified signal
separately 3 seconds after OFF HOOK.
After 16-digit signal is transmitted, the
signal stops, but OFF HOOK status
continues.
Dial Pulse
Send Dial Pulse Send
<Press the Up or Down
button to change the
value at the cursor>
<Press the Left or Right
button to move the
cursor>
Note: Unplug phone line before
performing this test to prevent a call
connection.
Fax/Scanner Diag
Test Control Panel Display Test Description