Xerox Phaser 6180MFP, Service Manual

Page: 586 / 884

5-60 Phaser 6180MFP Multifunction Printer Service Manual
Print-Quality Troubleshooting
Unfused Image
The toner image is not completely fused to the paper. The image easily rubs
off.
Initial Actions
■
Check the paper transfer path.
■
Ensure there are no debris on the transfer path.
Warning
Ensure to wait for the Fuser to cool down before starting the procedure.
Troubleshooting Reference Table
Applicable Parts Example Print
■
Print Cartridge (C/M/Y/K),
PL5.1.17-20)
■
Fuser, PL6.1.10
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1
1. Verify the media type selection:
System > Tray Settings > Tray1
(MPT)/Tray 2/Tray 3 > Paper Type .
Go to step 2. Set the correct
media type.
2
1. Check the paper condition.
2. Is the paper dry, recommended
type, and loaded in the correct
position?
Go to step 3. Replace the
paper.
3 1. Check the Print Cartridge (C/M/Y/K)
for damages.
2. Is the Print Cartridge damaged?
Go to step 4. Replace the
Print Cartridge
(page 8-11).
Unfused Image