Xerox Phaser 6180MFP, Service Manual

Page: 434 / 884

4-22 Phaser 6180MFP Multifunction Printer Service Manual
General Troubleshooting
Load NVM from
ESS LoadNVM from ESS
■
LoadNVM from ESS
OK?
■
Processing
■
Loaded
■
Please wait
<Press the OK button to
load the value saved in
the Controller NVM to the
Engine>
<Press the Exit button to
move one level up the
menu>
Loads NVRAM information of the
Engine saved in the Controller into the
Engine.
1000-10FF / 1100-11FF / 1200-12FF
Note: Information saved in the
Controller NVM can be initialized using
Clear All NVM .
Initialize Slave
(Do not use) Initialize Slave
■
Initialize Slave OK?
■
Processing
■
Initialized
■
Please wait
<Press the OK button to
run Slave Initialization>
<Press the Exit button to
move one level up the
menu>
Initializes Slave.
Print NVM Info Print NVM Info
■
Processing
■
Please wait
<Press the Set button to
run the test>
<Press the Cancel button
to move one level up the
menu>
Prints NVRAM information saved in the
Controller.
Print Info Provides printer configurations and settings information.
Menu Buttons
<Press the Up or Down
button to move from one
item to another>
<Press the Exit button to
move one level up the
menu>
<Press the OK button to
move to the execution
level>
Printer Diag Test Table (continued)
Test Control Panel Display Test Description