Xerox Phaser 6115 MFP, Service Manual

Page: 258 / 532

7-4 Phaser 6115MFP Multifunction Product Service Manual
Cleaning and Maintenance
Cleaning Procedures
Note
This section uses detailed artwork to highlight specific parts. For
photographic views of the basic wiring views for this machine, refer to
page 10-25.
Recommended Tools
■
Toner vacuum cleaner
■
Clean water
■
Clean, dry, lint-free cloth
■
Black, light protective bag
Perform the following general cleaning steps as indicated by the printer’s
operating environment.
Caution
Never apply alcohol or other chemicals to any parts in the printer. Never
use a damp cloth to clean up toner. If you remove the Imaging Unit, place
it in a light protective bag or otherwise protect it as exposure to light can
quickly degrade performance and result in early failure.
1. Record number of sheets printed.
2. Print several sheets of paper to check for problems or defects.
3. Turn off the printer.
4. Remove the Toner Cartridges, Imaging Unit, and side covers before
cleaning.
5. Ensure that all cover vents are clean and free of obstructions.
6. Remove any debris or foreign objects from the Transfer Roller, Fusing
Unit, and Imaging Unit.
7. Vacuum loose toner from the printer interior using a Type II toner vacuum
only.
8. Remove and clean the paper trays.
9. Clean all rubber rollers with a lint-free cloth slightly dampened with cold
water.
This section describes regular maintenance procedures.