Xerox Phaser 6115 MFP, Service Manual

Page: 207 / 532

Phaser 6115MFP Multifunction Product Service Manual 6-11
Adjustments and Print Function Settings
c. Using the p/q key, change the setting value and then press the Menu
Select key.
d. Print a test pattern 1 again and check it.
Adjustment Instructions:
■
If the width of A is less than the width of B..... Increase the setting.
■
If the width of B is less than the width of A..... Decrease the setting.
PRN Sub Regist
Function:
To vary and adjust the print start position in the sub-scanning direction.
Use:
If the image on the copy deviates in the sub scan direction, or when the Laser
Unit has been replaced.
Note
After the PRN MAIN REGIST adjustment has been performed
Adjustment:
Adjust the width of C in the printed test pattern 1 so that the following
specification is met.
Specification:
20 ± 2.5 mm
Adjustment Range:
-6.00 (-6.00 mm, ~ 0 (0 mm default), ~ +6.00 (+6.00 mm)
Step:
0.33 mm