Xerox Phaser 6115 MFP, Service Manual

Page: 193 / 532

Phaser 6115MFP Multifunction Product Service Manual 5-35
Print-Quality Troubleshooting
Brush Effect or Blurred Image
The image on the copy appears blurry or smeared.
Initial Actions
■
Verify the media used is supported by this printer.
■
Verify the media settings are correct at the Control Panel.
3 Has the problem been
eliminated? Complete Replace the following
units, listed in order,
until problem is
eliminated:
■
Engine Control
Board (page 8-57)
■
Fusing Unit
(page 8-36)
Troubleshooting Reference Table
Applicable
Parts
Example Print
■
Imaging Unit,
PL4.15.9
■
Transfer Belt
Unit, PL4.15.5
■
Fusing Unit,
PL4.18.12
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1
Check the media.
Is the paper damp or the
incorrect media for the
printer? Replace with paper
that meets the
specifications for the
printer. If the problem
persists, go to Step 2. Go to Step 2.
Troubleshooting Procedure Table (Continued)
Step Actions and Questions Yes No
I n k S mea rs D u plex
Ch r y s a n them u m x mo r ifoli u m
F u zzy Text
Ch r y s a n them u m x mo r ifoli u m
n them u m x
n them u m x
n them u m x Ch r y s a n them u m x mo r ifoli u m n them u m x Ch r y s a n them u m x mo r ifoli u m