Xerox Phaser 6115 MFP, Service Manual

Page: 188 / 532

5-30 Phaser 6115MFP Multifunction Product Service Manual
Print-Quality Troubleshooting
Blurred Image
The overall image density is blurry.
Initial Actions
■
Verify the media used is supported by this printer.
■
Verify the media settings are correct at the Control Panel.
Troubleshooting Reference Table
Applicable Parts Example Print
■
Laser Unit, PL4.14.1
■
Imaging Unit, PL4.15.9
■
Toner Cartridge (See consumables parts
list)
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1
Inspect the Laser Unit.
Is the window surface
dirty? Carefully clean the
window surface. If the
problem persists, go
to Step 2. Go to Step 2.
2
Inspect the Imaging Unit.
Is the outside of the surface
dirty? Clean the surface. If
the problem persists,
go to Step 3. Go to Step 3.
3
Has the problem been
eliminated? Complete Replace the following
units, listed in order,
until problem is
eliminated:
■
Toner Cartridge
(page 7-11)
■
Laser Unit
(page 8-15)
■
Imaging Unit
(page 8-13)
F u zzy Text
Ch r y s a n them u m x mo r ifoli u m
n them u m x
n them u m x
n them u m x Ch r y s a n them u m x mo r ifoli u m n them u m x Ch r y s a n them u m x mo r ifoli u m