8
.4
<Maintenance>
3
Remove the new toner cartridge from its bag.
Caution
Do not use sharp objects, such as a knife or scissors, to open
the
toner cartridge
package. They might scratch the drum of
the cartridge.
4
Remove the packing tape and roll the cartridge 5 or 6 items to
distribute the toner.
Thoroughly roll the cartridge to assure maximum copies per
cartridge. Save the box and the plastic bag for shipping.
Cautions
• If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.
• To prevent damage to the
toner cartridge
, do not expose it
to light for more than a few minutes. Cover it with a piece of
paper, if necessary.
• Do not touch the green surface underside of the
toner
cartridge
. Use the handle on the cartridge to avoid touching
this area.
5
Hold the
toner cartridge
by the handle and slowly insert the
cartridge into the opening in the printer.
6
Tabs on the sides of the cartridge and corresponding grooves
within the printer will guide the cartridge into the correct position
until it locks into place completely.
7
Close the
front cover
. Make sure that the cover is securely closed.
Clearing the Toner Low Replace Toner message
When the
Toner Low
Replace Toner
message appears you can
configure not to see this message again not to disturb you.
1
Press
Menu
until
System Setup
appears on the bottom line of the
display and press
OK
.
2
Press the Scroll buttons until
Maintenance
appears and press
OK
.
3
Press the Scroll buttons until
CLR Empty Msg.
appears and press
OK
.
4
Select
On
and press
OK
.
5
Now the
Toner Low
Replace Toner
message does not appear but
the
Replace Toner
message will remain for reminding you that the
new cartridge needs to be installed for quality.
Caution
Once you have selected
On
, this setting will be permanently
written to the memory of the toner cartridge, and this menu will
be disappeared from the
Maintenance
menu.
Maintenance parts
To avoid print quality and paper feed problems resulting from worn parts
and to maintain your printer in top working condition the following items
will need to be replaced at the specified number of pages or when the
life span of each item has expired.
Xerox highly recommends that an authorized service provider, dealer or
the retailer where you bought printer performs this maintenance activity.
Items
Yield (Average)
Transfer roller
Approx. 70,000 pages
Pick-up roller
Approx. 150,000 pages
Fuser unit
Approx. 80,000 pages
