Xerox Phaser 3428 User Manual Download | Manualshive

Page: 2 / 89

background image

This manual is provided for information purposes only. All information included herein is subject to change without notice. Xerox Corporation is not responsible
for any changes, direct or indirect, arising from or related to use of this manual.

© 2006 by Xerox Corporation. All rights reserved.

• Phaser 3428/D and Phaser 3428/DN are trademarks of Xerox Corporation.
• Xerox and Xerox logo are trademarks of Xerox Corporation.
• Centronics is a trademark of Centronics Data Computer Corporation.
• IBM and IBM PC are trademarks of International Business Machines Corporation.
• PCL and PCL 6 are trademarks of Hewlett-Packard company.
• Microsoft, Windows, Windows 9x, Windows Me, Windows 2000, Windows NT 4.0, Windows XP, and Windows 2003 are registered trademarks of

Microsoft Corporation.

• PostScript 3 is a trademark of Adobe System, Inc.
• UFST® and MicroType™ are registered trademarks of Agfa division of Bayer Corp.
• TrueType, LaserWriter, and Macintosh are trademarks of Apple Computer, Inc.
• All other brand or product names are trademarks of their respective companies or organizations.

«
1
2
3
4
...
»

Summary of Contents for Phaser 3428


























































































Reviews:

No comments

Related manuals for Phaser 3428

Brand: Xerox Pages: 341

Brand: DataCard Pages: 8

Brand: DataCard Pages: 8

Brand: DataCard Pages: 3

Brand: 3Doodler Pages: 8

VariQuest Perfecta 2400STP

Brand: Varitronics Pages: 227

Brand: Xerox Pages: 418

Brand: Oce Pages: 209

Brand: Oki Pages: 88

Brand: Oki Pages: 40

Brand: MIMAKI Pages: 20

Brand: Ricoh Pages: 162

Brand: Agilent Technologies Pages: 2

Brand: Ricoh Pages: 23

Brand: Creality 3D Pages: 65

Brand: Jolimark Pages: 31

Brand: Digital Equipment Pages: 122

da Vinci 2.0 Duo

Brand: XYZ Printing Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands