2
.5
<System setup>
Emulation menu
Use the
Emulation
menu to configure printer language emulation.
PCL
This menu sets the PCL emulation configuration. You can set the font
type, symbol type, lines per page, and point size.
Item
Explanation
Emulation
Type
The printer language defines how the computer
communicates with the printer.
If you select
Auto
, your printer can change the
printer language automatically.
Note
This
PostScript
is available only with the
Phaser 3428/DN.
Setup
See the tables on page 2.5 to configure the printer
language.
Note
This
PostScript
is available only with the
Phaser 3428/DN.
Item
Explanation
Typeface
You can select the standard font to be used in PCL
emulation.
• PCL1~PCL7’s interval between letters is fixed, and
PCL8~PCL45’s interval is proportional to the font
type and point size. You can adjust the font size of
PCL1~PCL7, PCL55, PCL56 using the
Pitch
item,
and PCL8~PCL45, PCL57~PCL68 can do using
Point Size
item.
• PCL46~PCL54’s interval and point size are fixed.
Symbol
This item selects the symbol to be used in PCL
emulation. The symbol is the group of numbers,
marks, and special signs being used when printing
letters.
Point Size
When you select one between PCL8 and PCL45 from
the
Typeface
menu, you can determine the font size by
setting the height of the characters in the font.
Values: Auto, PCL, PostScript, EPSON, IBM
ProPrint
Values: PCL, PostScript, EPSON
Values: PCL1 ~ PCL68
Values: ROMAN8 ~ PC737
Values: 4.00 ~ 999.75 (0.25 unit)
PostScript (Phaser 3428/DN only)
This menu provides you with the Print PS Error menu item.
EPSON
This menu sets the EPSON emulation configuration.
Courier
This item lets you select the version of Courier font to
use.
Pitch
When you select one between PCL1 and PCL7 from
the
Typeface
menu, you can determine the font size by
setting the number of characters that will print in one
horizontal inch of type. The default value, 10 is the
best size.
Lines
This item allows you to set vertical spacing from 5 to
128 lines for the default paper size. The lines may
differ according to the paper size and printing
orientation.
Item
Explanation
Print PS
Error
You can select whether or not your printer prints an
error list when a PS error occurs.
• Select
On
to print PS 3 emulation errors. If an error
occurs, the job stops processing, the error message
prints, and the printer flushes the job.
• If this menu is set to
Off
, the job is flushed without an
indication of the error.
Item
Explanation
Font
You can select the standard font will be used in
EPSON emulation.
Character
Set
This item allows you to select a character set of the
desired language.
Item
Explanation
Values: Regular, Dark
Values: 0.44 ~ 99.99 (0.01 unit)
Values: 5 ~ 128
Values: On, Off
Values: SANSERIF, ROMAN
Values: USA, FRANCE, GERMANY, UK,
DENMARK1, SWEDEN, ITALY, SPAIN1, JAPAN,
NORWAY, DENMARK2, SPAIN2, LATIN
