Xerox Phaser 3428 User Manual Download

Page: 64 / 89

Installing Printer Software in Windows

OTE

: If your printer is not already connected to the

computer, the following window will appear.

• After connecting the printer, click

Next

• If you don’t want to connect the printer at this time, click

Next

, and

on the following screen. Then the installation

will start and a test page will not be printed at the end of the

installation.

• The installation window that appears in this User’s

Guide may differ depending on the printer and

interface in use.

After the installation is finished, a window asking you to
print a test page appears. If you choose to print a test

page, select the checkbox and click

Next

Otherwise, just click

Next

and skip to step 7.

If the test page prints out correctly, click

Yes

If not, click

to reprint it.

Click

Finish

OTE

: After setup is complete, if your printer driver doesn’t

work properly, reinstall the printer driver. See “Reinstalling
Printer Software” on page 9.

Custom Installation

You can choose individual components to install.

Make sure that the printer is connected to your computer
and powered on.

Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click

Start

and

then

Run

. Type

X:\Setup.exe

, replacing “

” with the

letter which represents your drive and click

Click

Install Software

Select

Custom installation

. Click

Next

Select your printer and click

Next

Summary of Contents for Phaser 3428


























































































Search results

Summary of Contents for Phaser 3428

Reviews:

Related manuals for Phaser 3428

Brands by name

Popular brands

Xerox Phaser 3428, User Manual

Search results

Summary of Contents for Phaser 3428

Reviews:

Related manuals for Phaser 3428

Brands by name

Popular brands