Xerox Nuvera, User Manual

Page: 43 / 294

5
Xerox Nuvera 200/288/314 EA
Perfecting Production System
The basic configuration of a Xerox Nuvera 200/288/314 EA Perfecting Production System includes:
• Up to four feeders (4-Tray Feed Modules or 2-Tray Feed Modules)
• Control Console
• Dual Print Engines (two tandem Xerox Nuvera 100 ppm engines become 200 ppm, or two 144 ppm
engines become 288 ppm, or two 157 ppm engines become 314 ppm)
• Sheet Enhancement Module
• Up to two Sheet Insertion Modules (4-Tray or 2-Tray)
• Up to three Xerox Production Stackers (XPS)
Modules
Your Xerox Nuvera 200/288 EA/MX Perfecting Production System can be configured with a variey of
modules. Select the link below for information on the modules that can be installed.
4-Tray Feed Module - two standard stock size and two large stock size feed trays. The 4-Tray SFM must
be used with the Roll Feeder option.
Sheet Feed Modules (SFM)
2-Tray Feed Module - two high capacity large stock feed trays.
Sheet Feed Modules (SFM)
Sheet Enhancement Module - located directly to the right of the A2 print engine, this module is used
to remove upcurl or downcurl in paper as it passes through the module from the print engine.
Sheet Enhancement Module (SEM)
DS3500/XPS - enables inline finishing by providing document transport capability and full DFA support
to DFA-compliant finishing devices.
5-1 Xerox ® Nuvera ®
User Guide and Training Aid (UGTA)