Xerox Nuvera, User Manual

Page: 291 / 294

Receptacle NEMA Part Number
14-30 R (NASG)
Temperature and Humidity
Recommended 50 degrees F to 87 degrees F (10 C to 30.6 C)
15% relative humidity (minimum) to 85% relative humidity (maximum)
Altitude
Between 0 to 6000 ft (1828.8m) above sea level
Heat Emission
Approximately 2,018 BTU/hour (standby) and 11,600 BTU/hour (running)
Power Consumption
Approximately 0.658 kw maximum (standby) and 4.150 kw maximum (running). For information on
power consumption, see
Power Saver Mode .
Sheet Feed Modules (SFM)
The Xerox Nuvera can be configured with up to four Sheet Feed Modules. They include a 4-Tray Feed
Module that can be installed with an optional Integrated Scanner, and an optional large format, high
capacity 2-Tray Feed Module.
The Xerox Nuvera can have any combination of the 4-Tray or 2-Tray Feed Modules installed up to a
total of four modules. If the 4-Tray Feed Module has a scanner, it should be installed closest to the Print
Engine.
The 4-Tray Feed Module, without a scanner, or the 2-Tray Feed Module can also be installed as a
post-fuser Insertion Module.
Note
The Xerox Nuvera 200/288/314 EA/MX Perfecting Production System 2-Tray SFM is capable of feeding
paper up to 19.33 inches (491 mm) in process length. This is not an option on the Xerox Nuvera EA
2-Tray SFM.
4-Tray SFM Capabilities and Capacities
Note
Some of the sizes shown below are the actual range of tray guide adjustment, rather than a nominal
paper type. For example, 8.5 x 11 inches is a paper type and 5.5 x 8.27 inches is the range of tray
adjustment.
• Paper Weight Range: 16 lb. bond - 120 lb. index (52 - 300 gsm)
• Paper Size Range: 5.5 x 8.27 inches - 12.2 x 18.5 inches
• Total Paper Input Capacity (based on 20 lb. bond/75 gsm): 5,800 sheets
21-35 Xerox ® Nuvera ®
User Guide and Training Aid (UGTA)
Machine Specifications