224
How to customize the MAX 200
How to change the copy features (continued)
Document image type
Introduction
The
document image type
feature
sets up the document image
type default, located on page 88.
When a document is scanned, the machine makes adjustments to
meet specific image quality conditions, for the selected default.
When setting up this feature, select the document image type you
scan the most.
Procedure
1. Enter custom presets. If needed, refer to page 174.
2. Select
the
copy features
tab.
3. Use the arrow buttons to select the
document image type
feature.
4. Select
open
.
The
document image type
screen
is displayed.
5. Select the desired document image type default;
line
,
line/picture
,
picture
,
photo, low contrast,
or
dark contrast
.
6. Select
done
to store your changes and exit from this screen.
To cancel the changes and exit from this screen, select
cancel
.
7. To exit, press the
custom presets
button
.
Press [Custom Presets] to return to
Previous screen.
Folder Setup
Auto/ Manual Mode
Media Cut Mode and Document
Orientation
Lead/Trail Edge Default Synchro
Variable length default
Background Suppression Level Default
Image Density
Document Image Type
System features
Copy features
Storage/Disk
Manager
Open
Custom Presets
Document Image Type
Cancel
Done
Line
Picture
Line/Picture
Photo
Low Contrast
Dark Contrast
