Additional touch screen features
119
Editing (continued)
Coordinates editing
Introduction
The
coordinate editing feature
applies the MAX 200 edit options to
a single area on your document. The edit area is defined by X and Y
coordinates and the coordinates must be in rectangular form.
Once you have defined the area with coordinates, you must apply the
edit options to the inside or outside area of the coordinates.
There are four coordinate edit options; trimming/masking, fill, contrast
reversal, and mirror image. Depending on your selection of inside or
outside, determines the options that are available to you.
Inside
Outside
Trimming/masking
Allows you to trim or mask
the inside edit area.
Not available
Fill
Allows you to add shading to the edit area. There are seven fill
patterns and three levels of fill available. The fill can be in black or
red.
Contrast reversal
Allows you to reverse the image. In black and white, the image is
white and the background is black. In red and white the image is
white and the background is red.
Mirror image
This option produces a copy
that is a mirror image of the
original.
Not available