How to customize the MAX 200
179
How to change the system features (continued)
Auto clear/backlight off
Introduction
After a job is completed, the
auto clear feature
resets the job
settings to the default values. To meet your requirements, change
the time it takes for the machine to reset the default values.
The
backlight
feature
sets the period of time for the touch screen
backlight to turn off, after a job is complete. You set the default time
period.
If both
auto clear
and
backlight
are set to yes, then each feature
occurs at the same time.
Procedure
1. Enter custom presets. If needed, refer to page 174.
2. Select
the
system features
tab.
3. Use the arrow buttons to select the
auto clear/backlight off
feature.
4. Select
open
.
The
auto clear/backlight
off screen
is displayed.
Press [Custom Presets] to return to
Previous screen.
System features
Copy features
Storage/Disk
Manager
Open
Time &Date
Auto Power Off
Auto Power save
Auto Clear/ Backlight Off
Attention Tone
Plotter Setup
Loading Stamp Data