How to customize the MAX 200
181
How to change the system features (continued)
Document width
Introduction
The
document width
feature
sets up the document series the
scanner recognizes in auto mode.
Procedure
1. Enter custom presets. If needed, refer to page 174.
2. Select
the
system features
tab.
3. Use the arrow buttons to select the
document width
feature.
4. Select
open
.
The
document width
screen
is displayed.
5. Select
8.5 inch
or
9 inch
.
6. Select
done
to store your changes and exit from this screen.
To cancel the changes and exit from this screen, select
cancel
.
7. To exit, press the
custom presets
button
.
Custom Presets
9 inch
8.5 inch
Cancel
Done
Document Width
Select document width, 8.5 inch or 9 inch
Press [Custom Presets] to return to
Previous screen.
System features
Copy features
Storage/Disk
Manager
Open
Time &Date
Auto Power Off
Auto Power save
Auto Clear/ Backlight Off
Attention Tone
Document Width
Plotter Setup
Loading Stamp Data
