Xerox MAX 200 User Manual Download Page 106

Page: 106 / 284

104

Additional touch screen features

Editing (continued)

Overall editing (continued)

Contrast reversal (basic)

Procedure

1. Select

contrast reversal

The

contrast reversal screen

is displayed.

2. Select the desired color;

black

red

•

If black is selected, the image is white and the background is
black. If red is selected, the image is white and the
background is red.

Note: When red is selected, the machine automatically

changes the print color to red/black.

To cancel the changes and exit from this screen, select

cancel

3. Insert the document to make copies, or select

done

as required

to select additional features.

Ready to copy
Load documents face down

Selected

Contrast Reversal

Cancel

Done

Off

Black

Red

Ready to copy
Load documents face down

Selected

Overall

Cancel

Done

Color Drop

Mirror Image

Fill

Color

Exchange

Trimming/

Masking

Contrast

Reversal

Summary of Contents for MAX 200





























































































































































































































































































Search results

Summary of Contents for MAX 200

Reviews:

Related manuals for MAX 200

Brands by name

Popular brands

Xerox MAX 200, User Manual

Search results

Summary of Contents for MAX 200

Reviews:

Related manuals for MAX 200

Brands by name

Popular brands