Xerox DocuPrint N3225, System Administrator Manual

Page: 34 / 325

Using the Menu System
1-26
❖
System Administrator Guide
Tray Sequence
Set the sequence of trays used by the
printer when tray switching is
required. The available values are:
Off
MBF-1
MBF-1-2
†
MBF-4-5
MBF-4-5-1
MBF-4-5-1-2
MBF-4-5-1-2-3
††
1-2
†††
1-2-3
4-5-1
4-5-1-2
4-5-1-2-3
††††
4-1
4-1-2
4-1-2-3
† Default when no accessories are installed.
†† Default with High Capacity Feeder installed.
††† Default with Envelope Feeder installed.
†††† Default with Envelope Feeder and High Capacity
Feeder installed.
The first tray of a sequence is used
until it runs out of paper, at which
time the next tray in the sequence is
used (if it has the correct paper size
and type). See the section Automatic
Tray Switching
1-106
for rules and
examples of usage.
Only installed tray options will
appear. If the value is set to Off ,
the printer will print from the
requested tray only, even if the
other trays contain the correct
stock.
1. Press Menu Up or Menu
Down until you see:
Menus
Tray Menu
2. Press Item Up or Item
Down
until you see:
Tray Menu
Tray Sequence
3. Press Value Up or Value
Down
until you see:
T r a y S e q u e n c e =
New Value
4. Press Enter . You will see:
Tray Menu
Tray Sequence
5. Press On Line . You will see:
Ready
Table 1.10 Tray Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.10 Page 6 of 7