Xerox DocuPrint N3225, System Administrator Manual

Page: 93 / 325

Using the Menu System
Chapter 1: Configuring the Printer
❖
1-85
Port Timeout
Set the time for determining when to
end an incomplete print job and poll
the next port in the polling sequence.
The available values are:
5 - 300 seconds ( 60* )
This item also causes an implicit job
end such as Control D in PostScript or
<ESC> E in PCL, and invokes the
emulation functions associated with
this action (e.g., form feed, reset,
etc.).
The time changes incrementally by 1
second each time either
Value Up
or
Value Down
is pressed.
Holding down Value Up or Value
Down causes continuous scrolling
through the values.
1. Press Menu Up or Menu
Down until you see:
Menus
Token Ring Menu
2. Press Item Up or Item
Down
until you see:
Token Ring Menu
Port Timeout
3. Press Value Up or Value
Down
until you see:
P o r t T i m e o u t =
New Value
4. Press Enter . You will see:
Token Ring Menu
Port Timeout
5. Press On Line . You will see:
Ready
Table 1.24 Token Ring Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.24 Page 12 of 14