Xerox DocuPrint N3225, System Administrator Manual

Page: 48 / 325

Using the Menu System
1-40
❖
System Administrator Guide
Draft Mode
Enable or disable the reduced toner
mode for draft printing. The available
values are:
Off*
On
When set to
On
, the printer
automatically reduces the amount of
toner by two-thirds (and prints a
draft-quality output).
1. Press Menu Up or Menu
Down until you see:
Menus
System Menu
2. Press Item Up or Item
Down
until you see:
System Menu
Draft Mode
3. Press Value Up or Value
Down
until you see:
D r a f t M o d e =
New Value
4. Press Enter . You will see:
System Menu
Draft Mode
5. Press On Line . You will see:
Ready
Edge-to-Edge
Enable or disable edge-to-edge
printing in PCL. The available values
are:
Off*
On
Although the printer can address
edge-to-edge, there is a 4 mm
border on all edges where print
quality cannot be guaranteed.
1. Press Menu Up or Menu
Down
until you see:
Menus
System Menu
2. Press Item Up or Item
Down until you see:
System Menu
Edge-to-Edge
3. Press Value Up or Value
Down
until you see:
E d g e - t o - E d g e =
New Value
4. Press Enter . You will see:
System Menu
Edge-to-Edge
5. Press On Line . You will see:
Ready
Table 1.14 System Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.14 Page 5 of 11