Xerox DocuPrint N3225, System Administrator Manual

Page: 62 / 325

Using the Menu System
1-54
❖
System Administrator Guide
Baud Rate
Set the baud rate for the serial port.
The available values are:
115200 9600*
57600 4800
38400 2400
28800 1200
19200 600
1. Press Menu Up or Menu
Down until you see:
Menus
Serial Menu
2. Press Item Up or Item
Down
until you see:
Serial Menu
Baud Rate
3. Press Value Up or Value
Down
until you see:
B a u d R a t e =
New Value
4. Press Enter . You will see:
Serial Menu
Baud Rate
5. Press On Line . You will see:
Ready
Binary PS
Enable or disable the binary mode of
PostScript for jobs received on this
port. The available values are:
Off*
On
The parameter applies to all protocols
and interfaces except the following:
Parallel, Serial, EtherTalk, TokenTalk.
EtherTalk and TokenTalk are always set
to Binary mode. Parallel and Serial
cannot be set to Binary mode.
1. Press Menu Up or Menu
Down
until you see:
Menus
PostScript Menu
2. Press Item Up or Item
Down until you see:
PostScript Menu
Binary PS
3. Press Value Up or Value
Down
until you see:
B i n a r y P S =
New Value
4. Press Enter . You will see:
PostScript Menu
Binary PS
5. Press On Line . You will see:
Ready
Table 1.18 Serial Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.18 Page 3 of 3