Xerox DocuPrint N3225, System Administrator Manual

Page: 91 / 325

Using the Menu System
Chapter 1: Configuring the Printer
❖
1-83
Sub Net Mask
Set the four byte Sub Net Mask
address. The available values are:
xxx.xxx.xxx.xxx
Where xxx=000 to 255
This item only appears if IP Address
Res. is set to
Static
.
For this item (after Step 3), Item
Up moves the cursor to the right
through the displayed Sub Net Mask
address and
Item Down
moves
the cursor to the left. This allows you
to change characters within the string
rather than having to re-enter the
entire string.
With the cursor displayed under a
character,
Value Up increments
the value of that character and Value
Down decrements the value.
1. Press Menu Up or Menu
Down until you see:
Menus
Token Ring Menu
2. Press Item Up or Item
Down
until you see:
Token Ring Menu
Sub Net Mask
3. Press Value Up or Value
Down
. You will see:
S u b N e t M a s k =
xxx.xxx.xxx.xxx
4. Press Value Up or Value
Down to change the value
of the character above the
cursor. The value is
incremented or decremented
by 1 each time the key is
pressed. Holding down
Value
Up or Value Down
causes continuous scrolling
through the values.
S u b N e t M a s k =
xxx.xxx.xxx.xxx
5. To change other characters in
the Sub Net Mask address,
press
Item Up or Item
Down
to scroll right or left
respectively through the
character string, then press
Value Up or Value
Down
to change the value
of the character above the
cursor (as in Step 4).
S u b N e t M a s k =
xxx.xxx.xxx.xxx
6. When you have completed
setting the Sub Net Mask
address, press
Enter . You
will see:
Token Ring Menu
Sub Net Mask
7. Press On Line . You will see:
Ready
Table 1.24 Token Ring Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.24 Page 10 of 14