Xerox DocuPrint C2428, User Manual, Page: 53 / 283

53
2
B
a
sic
Op
eration
s
2.3
Canceling Sleep Mode
To save power, the printer is switched to the sleep mode (power saver mode) if it does not
receive print data for a certain period of time.
By default, the printer is switched to the sleep mode if it does not receive print data for 15
minutes. You can set whether the sleep mode is enabled or not and, if enabled, the duration
of time until the printer is switched to the sleep mode between 15 to 240 minutes. The power
consumption in sleep mode is 4 W or less. The transition time from the sleep mode to the
standby mode is about 30 seconds.
If the printer in the sleep mode receives print data, it is automatically released from the sleep
mode and starts printing.
●
The sleep mode is indicated as [Power Saver mode] on the control panel of the printer.
●
For information about the procedure for changing the settings of the sleep mode, refer to “Example: Changing
the power saver mode settings” (P.125).
●
This printer has the low-power mode besides the sleep mode. The low-power mode automatically decreases the
temperature of the fuser unit to save power consumption if the printer does not receive print data for about 15
minutes. The status of the printer in the low-power mode and the procedure to cancel the mode are the same as
the sleep mode. You cannot change the settings of the low-power mode.
Canceling Sleep Mode
The printer is automatically released from the sleep mode when it receives data
from the computer. You can also cancel the sleep mode manually by pressing
the <Power Saver> button on the control panel.