Xerox DocuPrint C2428, User Manual, Page: 143 / 283

5.2 Description of Common Menu
143
5
Settin
g
Control
Panel
EtherTalk
Set when using EtherTalk. This item is displayed when the PostScript Software Kit (optional) is
installed.
■
Port Status
Set the status of EtherTalk port to enabled or disabled when the power is switched on. Default is
[Disable]. Set [Enable] when you use EtherTalk.
If memory becomes insufficient when the port is set to [Enable], the status of the port may be automatically set
to [Disable]. Set the status of the unused port to [Disable] or change the memory allocation capacity, in case of
insufficient memory.
■
PJL
*2 (P.155)
You can use the PJL command with this printer, which does not depend on any print language. The
PJL command controls the print job, and is necessary when you use the printer driver. Set the status
of the PJL command sent from the computer to enabled or disabled. By using the PJL command, you
can select the print language for the next data, even if the printer is under another process in any print
language. Set [Enable] for normal use. Default is [Enable].
USB Port
Set to use the USB port.
■
Port Status
Set the status of the USB port to enabled or disabled when switching off the power. Default is
[Disable]. Set [Enable] when you use the USB port.
Set the status of the unused port to [Disable] or change the memory allocation capacity, in case of insufficient
memory.
■
Print Mode
*1 (P.155)
Set the process method (targeted print language) of the print data.
[Auto] (default)
The proper process is automatically selected according to the language of the data received from the
computer.
[PS] [HP-GL/2] [PCL] [TIFF]
Each piece of data received from the computer is processed. [PS] is indicated when the PostScript
Software Kit is installed.
■
PJL
*2 (P.155)
You can use the PJL command with this machine, which does not depend on any print language. The
PJL command controls the print job, and is necessary when you use the printer driver. Set the status
of the PJL command sent from the computer to enabled or disabled. By using the PJL command, you
can select the print language for the next data, even if the printer is under another process in any print
language. Set [Enable] for normal use. Default is [Enable].
■
Auto Eject Time
*3 (P.155)
Set the time to output remaining data in the printer, in case data transmission is interrupted.
You can select from 5 to 1275 seconds, in 5 second increments. Default is [30 Secs]. When the next
data is not received during this time, it is recognized as the end of job.