
Settin
g
Printe
r
Environ
m
ent
30
1
1.2
Setting the Printer
Environment With the
Quick Setup Menu
When setting the printer environment, you can use the Quick Setup menu to configure the
minimum required settings.
Setting items with the Quick Setup menu
The following items can be set using the Quick Setup menu.
Follow the instructions displayed on the control panel to configure the settings.
You can also set items separately depending on the printer environment without using the Quick Setup
menu. For information about items which cannot be set with the Quick Setup menu and how to set
items separately, refer to “Chapter 5 Setting Control Panel” (P.121).
Setting item
Description
Setting whether to
automatically print the Job
History Report
The information on a maximum of the 50 latest print jobs is
printed out to the [Job History Report]. Set whether to
automatically print out this [Job History Report] every time
the number of print jobs exceeds 50.
Setting the system clock
Set the date (year/month/day) and time (hour/minute) of
the system clock in this printer in the format of Christian
year (4 digits, in the range of 2000 to 2099) and 24 hours.
The date/time set here is printed out on the list or report.
(Enter the date in YYYY/MM/DD format, and time in
HH:MM format.)
Setting the network port,
protocol, and spool
The Setup menu allows you to set multiple ports at one
time according to a series of steps.
●
SMB, LPD, IPP, NetWare, Port9100, SNMP, EtherTalk
(optional)
Set the port, protocol, and spool you want to use
depending on the network environment.
Setting whether to use
Internet services
Using Internet services (CentreWare Internet Services)
allows you to display the printer/job status or change the
settings of this printer by using the Web browser.
Setting whether to use
SNMP
Set this item to activate when using software such as
CentreWare that remotely controls multiple printers, or
automatically installing the printer driver from Software
Pack CD-ROM.
Setting whether to use
DHCP, BOOTP, and RARP,
and setting IP address.
(Set this item only when
using TCP/IP.)
Set whether to automatically obtain the information
required to use TCP/IP (IPaddress, subnet mask, and
gateway address) from DHCP (Dynamic Host
Configuration Protocol) server, BOOTP, and RARP.
When you do not use the DHCP server, BOOTP, or RARP,
enter the IP address manually.
Summary of Contents for DocuPrint C2428
