34
2 Basic Operation
Switching On/Off the
Power
Switching On the Power
1.
Press the <|> side of the printer’s power
switch to turn on the power.
2.
This will cause [Please Wait...] to appear on
the control panel display. Wait until the
display message changes to [Ready to print].
Note
• The [Please Wait...] message indicates the printer is
warming up. Printing cannot be done while this
message is displayed.
• If an error message is displayed, refer to “Error
Messages (in Alphabetical Order)” (P. 62) to remedy the
error.
Switching Off the Power
Important
• Do not switch the power off when the <Energy Saver>
lamp is blinking. The <Energy Saver> lamp flashes if the
hard disk (option) is being accessed while the printer is
in the power saver mode.
• Do not switch the power off when the display reads
[Please wait...].
• Do not switch the power off during printing. Doing so
can cause paper jams.
• Turning off power causes any print data or other data in
the printer to be deleted.
• After you turn off the power, the printer remains on for a
short while as it performs an internal power off
procedure. Do not unplug the power cord immediately
after turning off the power switch.
• After turning off the power, make sure the control panel
display is blank before turning the printer back on again.
1.
Make sure that the printer is not in operation
by checking the display or indicator lamps.
2.
Press the < > side of the printer’s power
switch to turn off power.
About the Ground Fault
Interrupter
A ground fault interrupter is located on the back
left of the printer.
It protects against ground leakage, fire, and other
problems by breaking the electrical circuit
automatically whenever ground leakage from the
printer occurs.
If the ground fault interrupter is triggered, check
the insulation of the printer’s wiring and then press
the <RESET> button.
If the insulation of the printer’s wiring has not been
fixed, the ground fault interrupter will trigger again.
If this happens, contact our Customer Support
Center.
At least once a month, turn off the printer’s power
switch to check operation of the ground fault
interrupter. Improper operation creates the risk of
electric shock.
If you discover any abnormality with the ground
fault interrupter, contact our Customer Support
Center.
Refer to
• For information on how to test the ground fault
interrupter, refer to “Operational Safety” (P. 12)
<TEST> button
<RESET> button
Power switch
Summary of Contents for DocuPrint C2255
Page 1: ...DocuPrint C2255 Quick Reference Guide...
Page 106: ......
