Xerox DocuPrint C2255 Quick Referenc Manual Download Page 24

Page: 24 / 106

1 Printer Environment Settings

The following explains how to set up an IP
address on the Control Panel. Depending on your
network environment, your printer also needs a
subnet mask and gateway address. Consult your
network administrator for the settings required for
your printer.

To Set the IP Address

On the control panel, press the <Menu>
button to display the menu screen.

Press the < > button until [Admin Menu] is
displayed.

Note

• If you went past the desired item, return to the item by

pressing the <

> button.

Press the < >or <OK> button to select.
[Network/Port] is displayed.

Note

• If you pressed the <

> or <OK> button on the wrong

item, return to the previous screen by pressing the <

or the <Return> button.

• To start over from the beginning, press the <Menu>

button.

Press the < > or <OK> button to select.
[LPD] is displayed.

Note

• [Parallel] appears only when the Parallel Port (optional)

is installed.

Press the < > button until [TCP/IP Settings]
is displayed.

Press the < > or <OK> button to select.
[IP Mode] is displayed.

Press the < > button until [IPv4 Settings] is
displayed.

Press the < > or <OK> button to select.
[Get IP Address] is displayed.

Press the < > or <OK> button to select.
The current set value is displayed.

10. Press the < > button until [STATIC] is

displayed.

11. Press the <OK> button to confirm your

selection.
If [000.000.000.000] appears, skip to step
15.

12. Press the < > or <Return> button to return

to [Get IP Address].

13. Press the < > button to display [IP

Address].

LanguageEmulation

Admin Menu

Network/Port

LPD

Network/Port

TCP/IP Settings

IP Mode

TCP/IP Settings

IPv4 Settings

Get IP Address

•

DHCP/Autonet

Get IP Address

STATIC

Get IP Address

•

STATIC

IPv4 Settings

Get IP Address

IPv4 Settings

IP Address

Summary of Contents for DocuPrint C2255











































































































Search results

Summary of Contents for DocuPrint C2255

Reviews:

Related manuals for DocuPrint C2255

Brands by name

Popular brands

Xerox DocuPrint C2255, Quick Referenc Manual

Search results

Summary of Contents for DocuPrint C2255

Reviews:

Related manuals for DocuPrint C2255

Brands by name

Popular brands