Xerox document centre285 series User Manual Download Page 183

Page: 183 / 209

Troubleshooting

171

7.3

Messages

This section explains about the different messages and error codes that appear on the printer
control panel display.

7.3.1

List of messages

There are two types of messages: machine status (indicated by "Status") and errors (by
"Cause/Treatment"):

The print data remaining in the printer and information stored in the printer memory are not secured
when the error message is being displayed.

Message

Cause/Treatment

Status:

The printer is ready to receive data from the
computer.

Status:

•

The printer system is being diagnosed or
initialized. This message is displayed
when the power is on or when the system
is reset. After a while, it will change to
"Ready to print".

•

The printer is warming up to print the
data remaining in the machine.

Status:

The printer is warming up to print the data
remaining in the machine.

Status:

Printing report/list.

Status:

Processing printing.

Status:

Using Tray * for printing. Do not pull our the
paper tray in use.

Status:

Processing printing.

Status:

Canceling print data.

Status:

In the state of waiting for data.

Summary of Contents for document centre285 series


















































































































































































































Search results

Summary of Contents for document centre285 series

Reviews:

Related manuals for document centre285 series

Brands by name

Popular brands

Xerox document centre285 series, User Manual

Search results

Summary of Contents for document centre285 series

Reviews:

Related manuals for document centre285 series

Brands by name

Popular brands