Xerox document centre285 series, User Manual

Page: 79 / 209

4.2 Installing/Uninstalling the Printer Drivers
67
Installing/Configuring the P
rinter
D
ri
v
ers
4
To restart the system, click Restart Windows Now.
To exit the installation, click Exit to Windows.
To configure the printer driver, click Printer Setup (for Windows 95/Windows 98/Windows Me)
or Printer Properties and Document Defaults (for Windows NT 4.0/Windows 2000). It is
recommended to activate the Auto Configuration feature first to define your printer
configuration in the printer driver. For details, refer to Auto Configuration of Printer in "4.3.2
Setting the printer properties".
"4.3 Configuring the Printer Drivers" for details on how to configure the printer driver.
●
You must restart Windows in order for the driver to work properly.
●
You may run the Setup.exe program to install the Windows 95/Windows 98/Windows Me printer driver
as an alternate driver on the Windows NT server (workstation) after you have installed the printer
driver for Windows NT 4.0. If you install the alternate driver onto Windows 2000, use the Add Printer
Wizard. In this case, as there is no need to restart Windows, click Exit to Windows. When
downloading the alternate Windows 95/Windows 98/Windows Me driver installed in Windows NT/
Windows 2000, on the Windows 95/Windows 98/Windows Me client computer, use the Add Printer
Wizard dialog box.