Xerox document centre285 series, User Manual

Page: 127 / 209

5.3 Common Menu Items
115
Mode
M
e
nu and Common Menu
5
SMB The following items are to be set when using SMB:
Port Status
Sets the port status of the SMB port when the power is switched on. The
candidate values are:
• Enable (default)
•
Disable
If the memory is not enough when the Port Status is set to Enable, it may be set to
Disable automatically. When this happens, either set the Port Status of other ports not
in use to Disable or change the memory allocation.
Transpt Protocol
Sets the protocol of the transport layer used by SMB. The candidate values
are:
• TCP/IP, NetBEUI (default)
•
TCP/IP
•
NetBEUI
To use TCP/IP, you will need to set the IP address on both the computer and printer.
Print Mode
Sets the printer language. The candidate values are:
• Auto (default)
The language to be used will be determined automatically
•
PCL
•
PS (available only when PostScript Kit is installed)
When the value is set to Auto, and if the printer language used cannot be found by the
automatic printer language detection feature or it is not the selected printer language,
the data may be erased.
PJL
Sets whether to enable the PJL commands sent from the computer. The
candidate values are:
•
Enable (default)
•
Disable
TBCP Filter
Sets whether to enable the TBCP filter when processing PostScript data.
Available only when PostScript Kit is installed. The candidate values are:
• Enable
•
Disable (default)
Menu item Explanation